Work Bench Accessories

Work Bench Accessories

cubio Bench Accessories

Create custom configurations by combining verso bench systems with our wide range of accessories including backpanels, drawer dividers and hook and bin kits.

cubio Bench Backpanels

Backpanel set utilising the reinforced horizontal panels complete with end wing plates and rear mounting channels.
Available in perfo, louvre and combination styles.
For direct fitment to the worktop, suitable for any bench.

cubio Bench Frame Parts

Robust steel endframes in fixed or adjustable height versions.
Stringer sets are available for use with 1500 and 2000mm long tops and consist of two top cross members a single base cross member and two rear corner braces.

cubio Worktop Support Brackets

Steel joining plates and wall supports for use with extended worktop runs and custom installation.
Powdercoat RAL7035 grey finish.

cubio - Custom Worktops

Corner and ‘T’ shape worktops for use in custom installations. The 750mm sections integrate with the standard worktops and the corner sections allow 1050mm wide or 525mm square cabinets to sit underneath. As well as cabinets, the worktops can be supported by the cubio endframes and support brackets.

cubio - Half back frames

  • Create an ergonomic workstation.
  • Suitable for all bench styles.
  • Fits directly to the worktop.
  • Rear sections are 900, 1350 or 1800mm wide to suit accessories.
  • Supplied in RAL7035 light grey.

cubio - Rear Framework System

Create an ergonomic workstation with models available to suit framework or storage style workbenches.
The twin upright set builds a single rear section and the triple upright set allows for two rear sections, an additional upright can be used to further divide rear sections.
Short uprights are suitable for a 2 x 240mm or a 480mm high panels and a fixed shelf's.
Rear sections may be 450, 900, 1350 or 1800mm wide and can be configured in any combination up to the width of the bench.
Accessories availble in 450, 900, 1350 or 1800mm widths.

cubio - Rear Framework Accessories

Chose from our wide range of accessories including, lights, power rails, monitor brackets, backpanels, shelves, drawers and hook and bin kits.

verso Bench Accessories

Create custom configurations by combining verso bench systems with our wide range of accessories including backpanels, drawer dividers and hook and bin kits.

verso Bench Backpanels

Backpanel set utilising the reinforced horizontal panels complete with end wing plates and rear mounting channels.
Available in perfo, louvre and combination styles.
For direct fitment to the worktop, suitable for any bench.

verso - Half back frames

  • Create an ergonomic workstation.
  • Suitable for all bench styles.
  • Fits directly to the worktop.
  • Rear sections are 900, 1350 or 1800mm wide to suit accessories.
  • Supplied in RAL7035 light grey.

verso - Rear Framework System

Create an ergonomic workstation with models available to suit framework or storage style workbenches.
The twin upright set builds a single rear section and the triple upright set allows for two rear sections, an additional upright can be used to further divide rear sections.
Short uprights are suitable for a 2 x 240mm or a 480mm high panels and a fixed shelf's.
Rear sections may be 450, 900, 1350 or 1800mm wide and can be configured in any combination up to the width of the bench.
Accessories availble in 450, 900, 1350 or 1800mm widths.

verso Rear Framework Accessories

Chose from our wide range of accessories including, lights, power rails, monitor brackets, backpanels, shelves, drawers and hook and bin kits.

Desc

Items 61-72 of 289

per page
View as Grid List
Desc

Items 61-72 of 289

per page
View as Grid List
To Top